10 Easy Ways to Improve Your Home Brewed Beer

10 Easy Ways To Improve Your Home Brewed Beer

West Coast Brewer Top 10 Easy Ways To Improve Your Home Brewed Beer

 

Top 10 Tips For Improving Home Brewed Beer

Home brewing is an fun but complex hobby, and home brewers are always on the lookout for ways to make their next batch of beer better than the last. The following is a list of the 10 easiest tips and methods for improving your home brewed beer.

 

1) Proper Cleaning And Sanitization
Probably the easiest way of improving the quality of your beer is to simply clean and sanitize your home brewing equipment properly. Cooled wort is extremely susceptible to contamination from bacteria and wild yeast strains. Anything that comes in contact with the wort once it has been cooled must be sanitized. Even small amounts of bacteria can quickly ruin the taste of your home brewed beer.

 

 

2) Use a Yeast Starter (or at Least Rehydrate Dried Yeast)
Many home brewers fall prey to under fermented home brewed beer, stalled fermentations, or off flavors caused by under pitching yeast or pitching nonviable yeast. A yeast starter is a great way of boosting your yeast cell count and of verifying the viability of a liquid yeast. If you are unable to create a yeast starter and are using dry yeast, at the very least you should rehydrate your dried yeast.

 

3) Aerate/Oxygenate Your Wort
Aerating and oxygenating your cooled wort is a fantastic method for improving the quality of your beer. Yeast requires oxygen to replicate quickly and once the airlock has been placed onto your fermenter, little to no new oxygen will be available for the yeast to consume.

 

4) Temperature Controlled Fermentation
Many home brewers who are first starting out take the importance of fermentation process for granted. During fermentation, billions of yeast cells are digesting malt sugars and converting them to nearly equal portions of carbon dioxide and alcohol. If the temperature of the fermentation is too high for your yeast strain, the fermentation may occur too rapidly and foul off flavors may be produced in your beer. If the temperature is too low, the yeast may not reproduce quickly enough and your beer may stall, be under fermented, or increase the possibility of a bacterial infection. So always pay attention to the temperature requirements of your yeast strain, and ferment your beer in a temperature controlled environment if possible.

 

 

5) Dechlorinate and Filter Your Water
Water is the primary ingredient in beer, and its importance should not be underestimated. Chlorine and contaminants can create significant off flavors in your finished beer. Carbon water filters are relatively inexpensive, and I highly advise that you pass your brewing water through one before using it during any part of the home brewing process.

 

 

6) Use Fresh Ingredients, Especially Hops
Home brewing ingredients, just like all other food ingredients, go bad and diminish in flavor and effectiveness over time. Whenever possible, always use the freshest available extracts, grains, yeasts, adjuncts, and hops when making your home brew. If you have spare ingredients, make sure that you store them properly for future use. Hops and yeasts should always be stored in the refrigerator.

 

 

7) Dry Hop Your Beer
Dry hopping is a simple and effective way of improving the aroma of a beer. Approximately 7 days prior to kegging or bottling your beer, simply add an appropriate amount of aroma hops to your fermenting beer to impart some fresh hopped aroma to it. Dry hopping is not acceptable for all beer styles, but can be a fantastic addition to IPAs and pale ales.

 

 

8) Do Not Rush Your Beer
It is easy to get excited about a beer and cut corners so that you can enjoy the beer more quickly. Unfortunately, cutting corners typically comes with a price. Beer takes time to brew, ferment, and condition. Do your best not to cut your boil short of 60 to 90 minutes, rush your fermentation by allowing the temperature to get too high, end fermentation early, or take shortcuts in bottle or keg conditioning.

 

 

9) Use Finings When Appropriate
A lot of things go into making a great home brewed beer. It is more then just taste. When appropriate, fining agents such as whirlfloc should be used to improve the clarity of your beer. Whirlfloc and other finings, such as Irish Moss, are very simple to use; you just drop a tablet in 15 minutes prior to the completion of your boil, and it will help precipitate excess proteins and tannins out of your wort, leaving you with a clearer and cleaner finished beer.

 

 

10) Do Not Oxidize Your Beer
Oxygen can quickly skunk the flavor of your home brew, and the only time when oxygen is a good thing is when you are aerating your wort prior to pitching your yeast. Even then you must be cautious not to aerate your wort if it has not been cooled to 80F or less, as you may risk causing hot side aeration. When racking or transferring your home brew, always be cautious not to splash or let the beer bubble up, introducing oxygen into it. If you keg your beer, it is a good idea to purge the head space of the keg with CO2 after filling the keg.

 

Those are the West Coast Brewer 10 Easy Ways of Improving Your Home Brewed Beer.

 

Many of the items mentioned above such as whirlfloc and Irish moss can be purchased here:

Home Brewing Equipment and Ingredients

 

You can also view home brewing deals here: HomeBrewingDeal.com

 

 

3 thoughts on “10 Easy Ways to Improve Your Home Brewed Beer

  1. Pingback: West Coast Brewer Home Brewing Website - Home Decor Ideas

Leave a Reply

Your email address will not be published. Required fields are marked *