West Coast Brewer Home Brewing Blog

Category: Brew Your Own

Save 25% On a BrewZilla Home Brewing System

MoreBeer.com Promo Codes and Coupons
Promo Code Description: Save up to 25% on BrewZilla and Bigiboil home beer brewing systems

MoreBeer.com Promo Code

Save 25% On Brew Zilla Home Brewing Systems with this MoreBeer.com Promo Code

Save 25% On Brew Zilla Home Brewing Systems with this MoreBeer.com Promo Code

Promo Code Description: Get a BrewZilla home brewery for just $349 or a DigiBoil for just $159 with this MoreBeer.com promo code
Promo Code Date: 11/15/2022 to 11/17/2022
MoreBeer Coupon Code: ZILLAKIT
MoreBeer.com Promo Code Type: MoreBeer Coupon Codes for November, 2022 Limited Time and Quantity

MoreBeer Promo Code Link:
Save up to 25% on BrewZilla and Bigiboil home beer brewing systems

View our top homebrewing promo codes and coupons at:   https://homebrewingcoupon.com/

Information on the 9 Gallon BrewZilla 120v Homebrew System from MoreBeer.com

We’ve seen a lot of all-in-one systems over the years, but none are as feature-packed and affordable as the Brew Zilla. While other units simply maintain your set temperature, the Brew Zilla home breweryfeatures a sophisticated digital controller which can be programmed with a full mash schedule, executing each step automatically. The built-in pump will continuously recirculate wort during the mash for more even heat distribution and higher efficiency, but thanks to the integrated camlock fitting, it has even more functionality. Add the optional whirlpool arm to make your late hop additions pop and speed up chilling time, or connect a camlock fitting and tubing to transfer wort to your fermenter. These are just a couple of reasons why MoreBeer loves the BrewZilla, but there are so many More!

Best Features:

Sophisticated digital controller capable of programmed mash steps, boil addition timers and delayed start
Built-in pump for constant recirculation during mash or whirlpooling and transferring with optional accessories
Full depth malt pipe for higher mash efficiency and capable of running small batches without a pricey adapter
Multiple power modes to cover each step of the brew day – low power to gently heat your mash up to full power for a rolling boil
Wort chiller included! Perfectly sized for this system and adds even more value to your purchase of the Brew Zilla
High capacity brewhouse – with a volume of over 9 gallons, you can fit more grain and more wort to make
Single wall design doesn’t trap in heat – chill your wort quickly after the boil!
Super convenient bottom handle makes lifting/pouring a breeze
This is the best price for an all-in-one brewing system you’ll find, period.
If you want to jump into all grain brewing right from your first batch, or as an upgrade from malt extract brewing, the Brew Zilla is a complete turn key solution. The Brew Zilla is an all-in-one electric brewery that has built-in elements for heating and boiling, programmable mash schedule and delayed start, a built-in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built-in spigot for transferring. It is extremely portable and uses 110V power so it can be used nearly anywhere.

The BrewZilla  version 3.1.1 unit features an upgraded main circuit board that changes how the automatic step mashing functions. Now when moving from step to step, the timer for each step will not begin counting down until the programmed temperature is reached. This means more accurate mash schedules than ever before! The new board also introduces boil addition timers so you’ll never miss the mark for hop additions.

To get the Wort Chiller Connection Kit for free, add the item to your cart along with the Brew Zilla and use code ZILLAKIT at checkout.

New accessory! Check out the BrewZilla Whirlpool Arm, which uses the unit’s internal pump to recirculate and spin the wort, improving hop extraction and chill times. No more stirring!

Automatic Step Mashing & Delayed Start!
One of the coolest features of the BrewZilla is the ability to program the unit with up to 6 individual temperatures and durations so you can step mash precisely how you desire. Simply press the “S1-S6” button to select the stage you want to adjust, and use the temp, time and +/- buttons to program the stage. If you have less than 6 stages in your mash schedule, program the stages you want to skip with 00:00 as the time and the controller will automatically move on to the next step. When all the stages are complete, the unit will sound an alarm and hold the last set temperature.

The programmable stages can also be used to set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or wake up in the morning. In order to do this, fill the unit with strike water and program the controller with two steps. Step 1 should be programmed at a temperature lower than the unheated strike water (so the elements will remain off), and the duration should be programmed for however long you want the delay. Then program Step 2 with your desired strike water temperature and a duration of 1-2 hours, giving the BrewZilla ample time to heat up and giving you a margin of error in case you hit the snooze button the morning of brew day.

Recirculating Mash with Full Depth Malt Pipe
The built-in magnetic drive pump easily recirculates wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the pump to transfer your wort to your fermenter. As with any mash, be sure to stir your grain very thoroughly after mashing-in so you start out with an even temperature throughout the grain bed.

Some competing models advertise their perforated malt pipes as “high flow”, but what they don’t mention is how this affects efficiency. When recirculating the mash, wort will escape through the side perforations rather than passing through the grain at the bottom-most end of the malt pipe which can lead to lower efficiency. The BrewZilla’s malt pipe is designed so that recirculating wort must pass through the entire grain bed before escaping through the false bottom and being pumped over the top of the grain bed again. If you’re worried about the flow rate, simply add a pound or two of rice hulls to your grain bill. This is especially recommended when brewing with a high level of wheat, oat, or flaked grains.

Power & Heating Control
Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.

We highly recommend adding the optional BrewZilla Neoprene Jacket to help reduce heating times and maintain a more vigorous boil. The extra thick neoprene jacket is custom designed to insulate the entire kettle portion of the BrewZilla while staying out of the way of the ball valve and handles. The jacket can help you acheive up to 10% faster heat up times and cut heat loss from the boiler in half. And when it comes time to cool your wort after the boil, simply remove the jacket! While other units boast a double wall design for better heat retention, this actually becomes a disadvantage when it comes to chilling.

The digital control panel makes it easy to see the current temperature and set the temperature you want. The digital controller is also water resistant so don’t worry about spills or some water dripping down the side. This controller is built for brewing!

The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it out and tabs at the base so you can set the malt pipe over the kettle to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.

The included stainless steel wort chiller is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings to connect to a hose, hose bib, or faucet.

What MoreBeer! loves about this product: Homebrewing is trending in the direction of all-in-one, all-grain brewing systems and the BrewZilla is the ultimate value. The cost is half of the next comparable system with programmable mash steps and nearly the same as buying converted coolers and a kettle. We’ve brewed on all the systems and we can truly say the BrewZilla is the easiest to use. We feel confident that a lot of first time brewers could buy this and use it with ease. At the same time quite a few of our experienced, all-grain brewing staff are buying it to brew at home. The unit is extremely compact because the pump is built-in to the bottom of the unit. You can move it around with ease which makes it perfect for guys and gals that have space constraints. Someone on the team also mentioned how they like that you can drain it via gravity without having to use the pump. All in all a great buy and highly recommended. Please note you will need a few extra pieces of hardware to connect the wort chiller and at least 2′ of silicone tubing for the sparge.

Use the Pump for More Than Just Recirculation!
One of the surprisingly handy features of the BrewZilla is that the recirculation pipe features a female camlock. This allows you to hook up other accessories and use the unit’s pump for more than just recirculating wort. With a male camlock and silicone tubing, for example, you can use the internal pump to push wort through a plate chiller or counterflow chiller. Check out our selection of camlock fittings here.

Brew Zilla Features:

Stainless steel construction
9 gallon total capacity with a finished beer output of 5-6 gallons
Digital temperature controller
Automatic step mashing with 6 programmable stages
110V power and plug
Dual heating elements for total control (1000 watts and 500 watts)
Stainless steel 1/2 inch ball valve for draining (dont have to use the pump)
Immersion wort chiller included
Stainless steel malt pipe/basket
Stamped in volume markers
Glass lid
Magnetic drive pump for recirculation
Recirculation arm
Bottom handle for easy lifting and pouring
Upgraded rocker switches
Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)

A Great Last Minute Gift for Home Brewers! A Brew Your Own Magazine Subscription for 50% Off with this More Beer Promo Code

Brew Your Own Magazine Promo Code

If you are looking for a last minute homebrew gift for the home brewer in your life look no further.  Brew Your Own Magazine is the best home brewing publication out there.  It features, home beer brewing recipes and focuses on the latest home brewing trends while not forgetting about the long legacy of traditional beer brewing.

Brew Your Own Magazine Promo Code

Brew Your Own Magazine Promo Code

Brew Your Own Magazine Promo Code Description: Use this MoreBeer.com Coupon Code and SAVE 50% on Brew Your Own Magazine Subscription for Home Beer Brewers.
Promo Code Date: 12/17/2019 to 12/19/2019
MoreBeer Coupon Code: BYO50
MoreBeer.com Promo Code Type: MoreBeer Coupon Codes for December, 2019 Limited Time and Quantity
MoreBeer Promo Code Link: Save 50% on Brew Your Own Homebrewing Magazine at MoreBeer.com with Promo Code

This Brew Your Own Magazine promo code is only good until 12-19-2019, so act fast if your want to save 50% off a Brew Your Own magazine subscription.