There are a few options out there for turnkey/ready made home brewing stands, brewing sculptures, and home breweries. Depending on the style and materials they can be very expensive, so you will want to make sure that you are making the right choice when it comes time to buy. Here are a few things to consider when you are ready to make your purchase.
1) How much volume do you plan on brewing?
This is important because you can quickly outgrow your brewing rig if you choose brewing kettles that are too small. Some brewers opt to just purchase larger kettles in case they decide to brew larger batches down the road, but that creates problems as well. When you try to brew a 5 gallon batch in a kettle that is 20 gallons or larger, the built-in thermometers can be above the fluid line, which renders them useless. Additionally, some sparge arms are too short to properly sparge a smaller amount of grain, and you will need to find a workaround. So make sure you give careful thought to your brewing capacity before buying.
2) What is your budget?
I don’t know about you, but I have wasted a small fortune buying home brewing gear only to replace it down the road when it either broke, or I decided to upgrade to a superior product. Home brewing stands, home breweries, and brewing sculptures are no different. If you have the money to spend upfront, then purchase the best available home brewing equipment so that you do not end up wanting an upgrade, or worse, needing to replace it down the road. Technology is improving in home brewing, but items such as brewing kettles, pumps, and wort chillers are items that may last a lifetime if they are of high quality and properly maintained. Most quality brewing sculptures are modular in design and can be modified or upgraded if needed.
3) How much space do you have available for home brewing?
This was my most difficult decision when I designed and built my home brewing stand. I do not have a lot of free space available where I live, so for awhile I debated if I was going to go with a single tier beer brewing sculpture or with a multi-tier. Ultimately, I ended up going with a single tier brewing stand. I had to free up a good deal of space in my garage, but the benefits of a single tier design were important enough for me to make the tradeoffs.
Here are some examples of different home brewing stands, beer sculptures, and home breweries. The beer sculptures shown are all made by either MoreBeer or Blichmann and you can click on the image or link to view additional details and prices.
The MoreBeer Tippy Dump is a great sturdy and compact multi-tier home brewery.
This is my top pick: The MoreBeer Single Tier Home Brewing Sculpture. It is all stainless and has two pumps moving the hot liquor and wort. All of the kettles are easily accessible, so you can work with them safely.
The MoreBeer Gravity-Fed home Brewing Stand does not use pumps so it is lower cost than the other brewing stands, and easier to store if you have a limited amount of surface area but height is not an issue.
Blichmann is one of my favorite names in home brewing, and I use a variety of their products, including their kettles. They make a high quality and affordable multi-tier brewing stand that is very customizable.